Crestron DM-TX-200 User Manual download pdf (Page 3)

DM-TX-200-C-2G Wall Plate DigitalMedia 8G+

™

Transmitter 200

crestron.com

800.237.2041

Input Resolutions, HDMI & DVI, Progressive: 640x480@60Hz,

720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz,

848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz,

1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50),

1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz,

1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz,

1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz,

1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz,

1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz

(1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60),

1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other

resolution allowed by HDMI up to 165MHz pixel clock

Input Resolutions, HDMI & DVI, Interlaced: 720x480@30Hz (480i),

720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz

(1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel

clock

Input Resolutions, RGB: 640x480@60Hz, 720x480@60Hz

(480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz,

1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60),

1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz,

1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz,

1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50),

1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz

Input Resolutions, Component

[4]

: 480i, 576i, 480p, 576p, 720p50,

720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50

(1125 lines), 1080p60

Input Resolutions, Composite and S-Video

[4]

: 480i, 576i

Output Resolutions: Matched to inputs

Analog-To-Digital Conversion: 10-bit 165 MHz per each of 3 channels

Audio

Switcher: 2x1 combination digital/analog switch

Input Signal Types: HDMI, DisplayPort Multimode

[3]

, analog stereo

Output Signal Types: DM 8G+, HDBaseT

Formats, HDMI: Dolby Digital

, Dolby Digital EX, DTS

, DTS-ES,

DTS 96/24, up to 8ch PCM

Formats, Analog: Stereo 2-channel

Analog-To-Digital Conversion: 24-bit 48 kHz

Performance (analog): Frequency Response: 20Hz to 20kHz ±0.75dB;

S/N Ratio: >90dB, 20Hz to 20kHz A-weighted;

THD+N: <0.05% @ 1kHz;

Stereo Separation: >90dB

Communications

USB: Supports signal extension of USB HID class devices

DigitalMedia: DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet

HDBaseT: HDCP, EDID, PoH, Ethernet

HDMI: HDCP, EDID, CEC

NOTE: Supports management of HDCP and EDID; supports management of

CEC between the connected HDMI device and a control system

Connectors – Front

AUDIO IN: (1) 3.5mm TRS mini phone jack;

Unbalanced stereo line-level audio input;

Input Level: 2 Vrms maximum;

Input Impedance: 10k Ohms

USB HID: (1) USB Type A female; USB 2.0 host port for connection of a

mouse/keyboard or other USB HID-compliant device

HDMI IN: (1) 19-pin Type A HDMI female;

HDMI digital video/audio input;

Also supports DVI and DisplayPort Multimode

[3]

PC IN: (1) DB15HD female;

RGB (VGA), component, S-Video, or composite video input

[4]

;

Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL;

Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration;

Input Impedance: 75 Ohms;

Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr;

Sync Input Level: 3 to 5 Vp-p;

Sync Input Impedance: 1k Ohms

Connectors – Rear

DM OUT: (1) 8-pin RJ45 female, shielded;

DM 8G+ output, HDBaseT compliant;

PoDM and PoH PD (Powered Device) port

[5]

;

Connects to the DM 8G+ input of a DM switcher, receiver/room controller,

or other DM device, or to a HDBaseT device, via CAT5e or Crestron

DM-CBL-8G cable

[1]

;

Note: RJ45 jack is recessed to accommodate long male cable connectors

24VDC 0.7A: (1) 2-pin captive screw terminal block;

24 Volt DC power input;

PW-2407WUL power pack included

G: (1) 6-32 screw, chassis ground lug

Controls & Indicators

PWR: (1) green LED, indicates operating power supplied via PoDM, PoH, or

power pack

RESET: (1) miniature recessed pushbutton for hardware reset

SETUP: (1) red LED and (1) miniature recessed pushbutton for

Ethernet setup

8G LINK: (1) green LED, indicates DM link status

8G ACTV: (1) yellow LED, indicates video and HDCP signal presence

HDMI: (1) green LED, indicates HDMI input is selected

PC: (1) green LED, indicates PC input is selected

DM OUT (rear): (2) LEDs, green LED indicates DM link status, amber LED

indicates video and HDCP signal presence

Power Requirements

Power Pack: 0.75 Amps @ 24 Volts DC;

100-240 Volts AC, 50/60 Hz power pack, model PW-2407WUL included

1 2 3 4 5

Comments to this Manuals

No comments

Crestron DM-TX-200 User Manual Page 3

Comments to this Manuals

Related products and manuals for Video switches Crestron DM-TX-200