Crestron TPS-MEM64MB Installation Guide download pdf (Page 15)

Crestron TPS-MEM64MB & TPS-MEM128MB Flash Memory

applicable, the back box Installation Guide. Disconnect power and

perform the installation procedure in reverse to remove the user interface.

The latest versions of the Operations & Installation Guides are available

from the Downloads | Product Manuals section of the Crestron website

(www.crestron.com

1. To prevent scratching of the screen (TPS-TPI excluded), place

the touchpanel facedown onto a padded surface.

2. As shown in the following diagram, use a #1 Phillips

screwdriver to loosen and remove the 10 screws that secure

the rear cover.

Remove Rear Cover Screws

CAUTION: The connectors of any optional cards that are already

installed may have to be aligned slightly to allow the rear cover to be

removed. Align the connectors carefully to prevent damage to the card,

cover, or unit.

3. Remove the rear cover as shown in the following diagram by

sliding it towards the bottom of the device.

Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

No comments

Crestron TPS-MEM64MB Installation Guide Page 15