Crestron TPS-ENET Installation Guide download pdf (Page 12)

Ethernet Card for TPS/Tilt Panel Crestron TPS-ENET

Install TPS-ENET

10. Refer to the diagram below. Install the two card mounting

screws (supplied), tighten to finger-tight then, using a #1

Philips screwdriver, tighten an additional 1/8-turn.

Install TPS-ENET Mounting Screws

11. Position the touchpanel base cover on the base.

8 • Ethernet Card for TPS/Tilt Panel: TPS-ENET Operations & Installation Guide - DOC. 6016

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Crestron TPS-ENET Installation Guide Page 12