Crestron PAC2 Professional Automation Control System
Operations Guide – Doc. 5941A Professional Automation Control System: PAC2 • 9
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
6 BACKUP NET INPUT
(1) 4-pin 3.5 mm detachable terminal block
backup Cresnet port;
Connects to the NET port of a backup control
system and power supply
24: Power (24 Vdc)
Y: Data
Z: Data
G: Ground
7 PWR LED (1) Green LED, indicates power supplied to
unit via AC line or BACKUP NET INPUT
8 Reset Buttons
HW-R – Hardware reset (reboots the control
system)
SW-R – Pressing this in combination with
HW-R button performs a system restart
without loading the program. Pressing it
alone momentarily while the system is
running restarts the program
9 NET LED (1) Yellow LED, indicates Cresnet bus
activity
10 ERR LED (1) Red LED, indicates control system has
generated an error message
11 LAN (A – B) LEDS
LNK – Indicate the Ethernet card has
established a valid Ethernet connection
ACT – Indicate communication (activity) at
the respective port on the Ethernet card
12 FAULT (and LED)
(1) 2-pin 3.5 mm detachable terminal block;
Contract closure output;
Relay closed when PAC become inactive;
Connects to digital input of backup control
system;
(1) Red LED, indicates PAC2 has become
inactive, FAULT output is active (relay
closed)
13 RELAY OUTPUT
(1 – 8)
(2) 8-pin 3.5 mm detachable terminal blocks
comprising (8) normally open, isolated
relays;
Rated 1 amp, 30 volts ac/dc;
MOV arc suppression across contacts
14 S3 Z-BUS (1) Z-Bus expansion slot;
Accepts all Z-Bus control cards
15 MEMORY EXPANSION (1) Type II Compact Flash card slot for
memory expansion (up to 4 GB)
16 COMPUTER
(1) DB9 female’
RS-232 computer console port
(Continued on following page)
Comments to this Manuals