Crestron DM-TX-200 Installation Guide download pdf (Page 33)

Crestron DM-TX-200-2G/400-3G Wall Plate DigitalMedia™ CAT Transmitters

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade it is necessary to establish

communication. Once communication has been established, files (for example,

firmware) can be transferred to the control system (and/or device). In addition, the IP

table of the device can be configured

Establishing Communication

Use Crestron Toolbox for communicating with the DM-TX-200-2G or

DM-TX-400-3G refer to the Crestron Toolbox help file for details.

A PC running Crestron Toolbox communicates with the DM-TX-200-2G or

DM-TX-400-3G in the following ways:

• Via a DM switcher using TCP/IP or USB communication. TCP/IP provides

a faster method of communication than USB.

• Via a DM-RMC-100 using TCP/IP communication.

Via DM Switcher

TCP/IP Communication via DM Switcher

ETHERNET

DM Switcher

PC Running

Crestron Toolbox

LAN

DM-TX-200-2G

DM-TX-400-3G

To establish TCP/IP communication between the PC and the DM-TX-200-2G or

DM-TX-400-3G via a DM switcher:

1. Establish communication between the PC and the DM switcher as described

in the latest version of the Digital Media Switchers Operations Guide (Doc.

6755).

2. Use the Device Discovery Tool in Crestron Toolbox to find the IP address

of the DM-TX-200-2G or DM-TX-400-3G. The tool is available in Toolbox

version 1.15.143 or later.

3. Use the Address Book in Crestron Toolbox to create an entry for the

DM-TX-200-2G or DM-TX-400-3G using the TCP connection type and

enter the IP address of the DM-TX-200-2G or DM-TX-400-3G.

4. Display the DM-TX-200-2G or DM-TX-400-3G’s “System Info” window

(click the

icon); communications are confirmed when the device

information is displayed.

Operations & Installation Guide – DOC. 6949B Wall Plate DigitalMedia™ CAT Transmitters: DM-TX-200-2G/400-3G • 29

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

No comments

Crestron DM-TX-200 Installation Guide Page 33