Crestron DM-TX-200 Installation Guide download pdf (Page 34)

Wall Plate DigitalMedia™ CAT Transmitters Crestron DM-TX-200-2G/400-3G

USB Communication via DM Switcher

USB

DM Switcher

PC Running

Crestron Toolbox

DMNet

DM-TX-200-2G

DM-TX-400-3G

To establish USB communication between the PC and the DM-TX-200-2G or

DM-TX-400-3G via a DM switcher:

1. Use the Address Book in Crestron Toolbox to create an entry using the

expected communication protocol (USB). When multiple USB devices are

connected, identify the DM switcher by entering “DM-MD8X8”,

“DM-MD16X16” or “DM-MD32X32” in the Model textbox, the unit’s

serial number in the Serial textbox or the unit’s hostname in the Hostname

textbox. The hostname can be sound in the “System Info” window in the

Ethernet section of the window, however, communication must be

established in order to see this information in the “System Info” window.

2. Display the DM-TX-200-2G or DM-TX-400-3G’s “System Info” window

(click the

icon); communications are confirmed when the device

information is displayed.

Via DM-RMC-100

TCP/IP Communication via DM-RMC-100

DM-RMC-100

PC Running

Crestron Toolbox

LAN

DM-TX-200-2G

DM-TX-400-3G

ETHERNET

The DM-TX-200-2G or DM-TX-400-3G connects to PC via Ethernet:

1. Confirm Ethernet connection between DM-RMC-100 and PC. If connecting

through a hub or router, use CAT5 straight through cables with 8-pin RJ-45

connectors. Alternatively, use a CAT5 crossover cable to connect the two

LAN ports directly without using a hub or router.

2. By default, DHCP is enabled. Use the Device Discovery Tool in Crestron

Toolbox to find the IP address of the DM-TX-200-2G or DM-TX-400-3G.

To change the IP configuration, from Crestron Toolbox, display the

“System Info” window (click the

icon) and select the DM-TX-200-2G

or DM-TX-400-3G entry from the Address Book. Select Functions |

Ethernet Addressing and enter the new IP address, IP mask and default

router of the DM-TX-200-2G or DM-TX-400-3G.

NOTE: If the DM-TX-200-2G is in a non-DHCP environment, a default IP

address (192.168.1.232) can be assigned by holding down its SETUP

button while applying power. If the DM-TX-400-3G is in a non-DHCP

environment, a default IP address (192.168.1.235) can be assigned by

holding down its SETUP button while applying power. This IP address will

overwrite any previous settings and will remain until it is changed.

3. Use the Address Book in Crestron Toolbox to create an entry for the

DM-TX-200-2G or DM-TX-400-3G with the DM-TX-200-2G’s or

DM-TX-400-3G’s TCP/IP communication parameters.

4. Display the “System Info” window (click the

icon) and select the

DM-TX-200-2G or DM-TX-400-3G entry from the Address Book.

30 • Wall Plate DigitalMedia™ CAT Transmitters: DM-TX-200-2G/400-3G Operations & Installation Guide – DOC. 6949B

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments

Crestron DM-TX-200 Installation Guide Page 34

Comments to this Manuals

Related products and manuals for Video switches Crestron DM-TX-200