Crestron DM-TX-200 Installation Guide download pdf (Page 8)

DigitalMedia™ CAT Transmitter 200 Crestron DM-TX-200

Applications

The following diagram shows a DM-TX-200 in a basic application.

DM-TX-200 in a Basic Application

No LAN connection is required for the DM-TX-200 to transmit HDMI or USB in a

point-to-point configuration. If you wish to use the control ports (IS, RS-232, Relay,

Sense) from a control system, you can connect either LAN port (on the

DM-RMC-100 or on the DM-TX-200) to the control system’s network. Both devices

will be connected because Ethernet is embedded inside DM. You may also use the

other LAN connection to provide Ethernet connectivity to a remote device.

You only have to apply power to one (either the DM-RMC-100 or the DM-TX-200)

and the other will receive it through the DMNet cable.

4 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

No comments

Crestron DM-TX-200 Installation Guide Page 8