Crestron IM-WCC Installation Guide download pdf (Page 27)

Crestron QM-FBCC/WCC-1 QuickMedia

Computer Centers

Operations & Installation Guide – DOC. 6716B QuickMedia

: QM-FBCC/WCC-1  23

2. If additional QM-FBCC/WCC-1 devices are to be added, repeat step

1 for each device. Each QM-FBCC/WCC-1 is assigned a different

Net ID number as it is added.

3. If necessary, double click a device to open the “Device Settings”

window and change the Net ID as shown in the following figure.

“Device Settings: Crestron QM-WCC-1/QM-FBCC-1” Window

NOTE: The ID code specified in the SIMPL Windows program must

match the Net ID of each unit. Refer to “Identity Code” on page 15.

Program

Manager

Program Manager is the view where programmers “program” a Crestron

control system by assigning signals to symbols.

The symbol can be viewed by double clicking on the icon or dragging it

into Detail View. Each signal in the symbol is described in the SIMPL

Windows help file (F1).

Example Program

An example program for the QM-FBCC/WCC-1 is available from the

Crestron Web site (www.crestron.com/exampleprograms).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

No comments

Crestron IM-WCC Installation Guide Page 27