Crestron ST-CP Specifications download pdf (Page 14)

1-Way Wireless RF Touchpanel Crestron ST-1550C

Down and up arrow buttons decrease and increase the timeout, respectively.

NOTE: Power Down Timeout should be set low to maximize battery life. However,

Power Down Timeout should be set greater than Standby Timeout. Otherwise, the

Standby Timeout is meaningless.

NOTE: If the external AC power pack is attached to the touchpanel and plugged

into an active AC receptacle or if the touchpanel is resting in the docking station

(ST-DSN) and plugged into an active AC receptacle, the panel does not power down

when the power down timeout is achieved. Recall that the purpose of the timeout is

to maximize battery life. Standby timeout still functions.

After timeout parameters have been set, touch the SAVE TIMEOUTS button in the

lower left corner of the ST-1550C to save the new settings. Touch the RETURN

button to display the Preferences And Settings screen.

Advanced Settings Screen

Advance Settings

The Advanced Settings button from the Preferences And Settings screen opens the

Advanced Settings screen, shown to the left of this paragraph.

The Advanced Settings screen contains diagnostic buttons (Display EEPROM,

Display Touch Data, Firmware, Display Palette, and Self Test). Diagnostic

buttons should only be used under supervision of a Crestron technical support

representative during telephone support. These options are numeric in nature and

their interpretation is beyond the scope of this Operations Guide.

This screen also contains special settings buttons (DayLight Savings, Power Up On

Last Page, and Interface). Details of the special settings buttons are discussed in the

following paragraphs.

Touch the RETURN button to return to the Preferences And Settings screen.

Daylight Savings Screen

Daylight Savings

To access the Daylight Savings screen, shown to the left of this paragraph, touch the

Daylight Savings button from the Advanced Settings screen. Two options are

available: Set Daylight Savings Time Northern Hemisphere and Set Daylight

Savings Time Southern Hemisphere. Each button can be toggled (ON/OFF states).

Activating one of these buttons causes the internal real time clock to automatically

adjust on the appropriate dates for Daylight Savings Time. An activated button is

indicated by the button’s background color changing to blue. After verifying the

setting, touch the RETURN button to return to the Advanced Settings screen.

NOTE: If you wish to completely deactivate the Daylight Savings Time feature,

verify that both buttons are not activated (both assume a background color of gray).

10 • 1-Way Wireless RF Touchpanel: ST-1550C Operations Guide – DOC. 6096A

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

No comments

Crestron ST-CP Specifications Page 14