Crestron CEN-TIA Specifications download pdf (Page 22)

Telephone Interface Module Crestron CEN-TIA

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device

contains the latest firmware to take advantage of the most recently released features.

However, before attempting to upload or upgrade, it is necessary to establish

communication. Once communication has been established, files (for example,

programs or firmware) can be transferred to the control system (and/or device).

Finally, program checks can be performed (such as changing the device ID or

creating an IP table) to ensure proper functioning.

Establishing Communication

Use Crestron Toolbox for communicating with the CEN-TIA. Refer to the Crestron

Toolbox help file for details. There are three methods of communication.

Direct Serial Communication

Direct USB Communication

PC RUNNING

CRESTRON TOOLBOX

CEN-TIA

SERIAL

USB

• CEN-TIA connects to PC running Toolbox via the USB port. Note that

Cresnet power must still be applied.

• Establish communication between the PC and the CEN-TIA. The first time

communication is established, Windows will launch the Found New

Hardware Wizard.

• Click the No, not this time radio button and then click Next.

18 • Telephone Interface Module: CEN-TIA Operations Guide – DOC. 6414

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

No comments

Crestron CEN-TIA Specifications Page 22