Crestron CEN-TIA Specifications download pdf (Page 25)

Crestron CEN-TIA Telephone Interface Module

Program Checks

Actions that can be performed on the CEN-TIA vary depending on whether it is

connected via Cresnet or Ethernet.

Cresnet Connections

For Cresnet connections, using Crestron Toolbox, display the network device tree

(Tools | Network Device Tree) to show all network devices connected to the control

system. Right-click on the CEN-TIA to display actions that can be performed on the

CEN-TIA.

Ethernet Connections

For Ethernet connections, display the “System Info window (click the

icon) and

select the Functions menu to display actions that can be performed on the CEN-TIA.

Be sure to use the Crestron Toolbox to create the CEN-TIA IP table.

• Select Functions | IP Table Setup.

• Add, modify or delete entries in the IP table. The CEN-TIA can have only

one IP table entry.

• A defined IP table can be saved to a file or sent to the device.

Edit the control system’s IP table to include an entry for the CEN-TIA. The entry

should list the CEN-TIA’s IP ID (specified on the CEN-TIA’s IP table) and the

internal gateway IP address 127.0.0.1.

Operations Guide – DOC. 6414 Telephone Interface Module: CEN-TIA • 21

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Crestron CEN-TIA Specifications Page 25