Crestron TPMC-8L Installation Guide download pdf (Page 15)

Crestron TPMC-8L Isys i/O™ 8.4” Touchpanel Media Center

Setup

Identity Code

The IP ID is set within the TPMC-8L’s table using Crestron Toolbox™. For

information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs

of multiple TPMC-8L devices in the same system must be unique.

When setting the IP ID, consider the following:

• The IP ID of each unit must match an IP ID specified in the SIMPL™

Windows

program.

• Each device using IP to communicate with a control system must have a

unique IP ID.

Configuring the Touchpanel

NOTE: The only connection required to configure the touchpanel is power. When

power is first applied to the touchpanel, the BIOS screen (white text on black

background) will be upside down. This will only occur during boot up.

The TPMC-8L is configured from the setup menu.

NOTE: If no project has been loaded or if an invalid project has been loaded, the

touchpanel displays an error message and defaults to the setup menu screen.

If a project is running, the setup menu can be accessed using one of three methods.

Via the Hard Keys

Press the hard keys 1, 2, 3 and 4 in sequence, two times within a 10 second period

(i.e. press 1, 2, 3, 4, 1, 2, 3, 4).

NOTE: The hard keys in the column on the left side of the touchpanel screen are

numbers 1 through 8 (top to bottom). The hard keys in the column on the right side

of the touchpanel screen are numbers 9 through 16 (top to bottom).

Via USB Keyboard

1. Attach a USB keyboard (refer to “Hardware Hookup” which starts on page

41 for details).

2. Open the “Validate User Account Info” window (shown on the following

page) by pressing Ctrl+Alt+Shift on the keyboard.

Operations & Installation Guide – DOC. 6594B Isys i/O™ 8.4” Touchpanel Media Center: TPMC-8L • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 67 68

No comments

Crestron TPMC-8L Installation Guide Page 15