Crestron GLS-EM-MCU Specifications download pdf (Page 18)

Crestron Green Light

Power Meter Control Unit Crestron GLS-EM-MCU

•

Crestron Green Light

Power Meter Control Unit: GLS-EM-MCU Operations Guide – DOC. 7294B

8-pin RJ-45 connectors. Alternatively, use a CAT5 crossover cable to

connect the two LAN ports directly without using a hub or router.

3. Use the Device Discovery Tool in Crestron Toolbox to detect all Ethernet

devices on the network and their IP configuration. The tool is available in

Toolbox version 1.15.143 or later.

4. Use the Address Book in Crestron Toolbox to create an entry for the

GLS-EM-MCU with the GLS-EM-MCU’s TCP/IP communication

parameters.

5. Display the “System Info” window (click the

icon) and select the

GLS-EM-MCU entry from the Address Book or the Address Book

drop-down menu.

Programs and Firmware

Program or firmware files may be distributed from programmers to installers or from

Crestron to dealers. Firmware upgrades are available from the Crestron Web site as

new features are developed after product releases. One has the option to upload

programs via the programming software or to upload and upgrade via the Crestron

Toolbox. For details on uploading and upgrading, refer to the SIMPL Windows help

file or the Crestron Toolbox help file.

SIMPL Windows

If a SIMPL Windows program is provided, it can be uploaded to the control system

using SIMPL Windows or Crestron Toolbox.

Firmware

Check the Crestron Web site to find the latest firmware. (New users may be required

to register to obtain access to certain areas of the site, including the FTP site.)

Upgrade GLS-EM-MCU firmware via Crestron Toolbox.

1. Establish communication with the GLS-EM-MCU and display the “System

Info” window.

2. Select Functions | Firmware… to upgrade the GLS-EM-MCU firmware.

Program Checks

Using Crestron Toolbox, display the “System Info” window (click the

icon) and

select the Functions menu to display actions that can be performed on the

GLS-EM-MCU.

Be sure to use Crestron Toolbox to create the GLS-EM-MCU IP table.

1. Select Functions | IP Table Setup.

2. Add, modify or delete entries in the IP table. The GLS-EM-MCU can have

only one IP table entry.

3. A defined IP table can be saved to a file or sent to the device.

Edit the control system’s IP table to include an entry for the GLS-EM-MCU. The

entry should list the GLS-EM-MCU’s IP ID (specified on the GLS-EM-MCU’s IP

table) and the internal gateway IP address 127.0.0.1.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Crestron GLS-EM-MCU Specifications Page 18

Comments to this Manuals

Related products and manuals for Unknown Crestron GLS-EM-MCU