Crestron DM-RX1-1G Installation Guide download pdf (Page 19)

Crestron DM-RX1-1G DigitalMedia™ CAT Receiver

“D” Cable (Stripping the Outer Jacket)

Outer Jacket

Foil Shield

2 1/2 in

(64 mm)

1/2 in

(13 mm)

Foil Shield

Wire Braid, Twisted

Outer Jacket

4. Trim foil shield to 1/2 inch (13 mm).

5. Remove the white neoprene sheath and separate the twisted pairs

to expose the spline. Cut the spline so that it is near flush with the

foil shield as shown in the following illustration. Return twisted

pairs to original position.

“D” Cable (Cutting the Spline)

Cut Spline To Here

6. Neatly wrap the twisted braid around the foil shield as shown in

the following illustration. Only the silver side of foil shield is

conductive.

Operations & Installation Guide – DOC. 6969B DM

CAT Receiver: DM-RX1-1G • 15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

No comments

Crestron DM-RX1-1G Installation Guide Page 19