Crestron DM-RX1-1G Installation Guide download pdf (Page 23)

Crestron DM-RX1-1G DigitalMedia™ CAT Receiver

13. Remove the pre-cut insulation from the grounding wire and

connect it to the electrical box or a ground wire in the electrical

box (the electrical box must be earth grounded).

14. Attach the unit to the electrical box using the two included

#06-32 x 3/4" oval head slotted screws as shown in the illustration

below.

CAUTION: Excess wire pinched between the unit and electrical

box could cause a short. Make sure that all excess wire is

completely inside the electrical box and not between the box and

the side of the unit.

15. Attach an appropriate decorative style faceplate (not supplied).

16. Remove the backing from the tape on the back of the included

insert. Affix the insert plate into its proper opening in the

faceplate.

DM-RX1-1G in 1-Gang Box (Exploded View)

Mounting Surface

One-Gang Wall Box

(Supplied Seperately)

DM-RX1-1G

(6503434 or 6504685)

Screws (2) #06-32 x 3/4”

(Oval Head (20009684)

Faceplate with Hardware

(Supplied Seperately)

Insert

(4510566 or 4512253)

Operations & Installation Guide – DOC. 6969B DM

CAT Receiver: DM-RX1-1G • 19

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

No comments

Crestron DM-RX1-1G Installation Guide Page 23