Crestron QM-RMCRX-BA Specifications download pdf (Page 50)

QuickMedia™ Receiver/Processor Crestron QM-RMCRX-BA

Slot 6: C2I-RXBA-VIDEO

The C2I-RXBA-VIDEO module is built into slot 06 of the QM-RMCRX-BA.

The QM-RMCRX-BA provides one QM input, labeled QM, which receives

composite video, S-video and RGB video as well as digital audio from a

QuickMedia transmitter such as the QM-WMC or QM FlipTop box.

The QM-RMCRX-BA provides the following video outputs:

• One BNC output labeled VIDEO for composite video.

• One mini-DIN output labeled S-VIDEO for S-video.

• One RGB output labeled RGBHV for computer video.

The C2I-RXBA-VIDEO module can route any video source to the

corresponding output for transmission to the display device.

The QM-RMCRX-BA supports up to 254 skew presets, where a skew preset

consists of three RGB skew values together with peaking and boost. Each skew

preset applies to the cable connection between the QM-RMCRX-BA and a

specific QM transmitter.

During normal program operation the system will recall a pre-configured preset

corresponding to the transmitter currently connected to the QM-RMCRX-BA. If

automatic video compensation is NOT enabled, the program must supply the

correct preset number using the <SkewPreset#> analog and recall the preset

manually.

If auto-compensation is enabled (via the <EnableVideoAutoComp> input),

then <SkewPreset#> is ignored and the QM-RMCRX-BA will automatically

extract the correct preset number directly from the transmitter's QM signal.

Depending on how the transmitter is configured, the QM signal will be

identified by a Transmitter ID (XMIT ID) or Cresnet ID. Auto-compensation

mode thus allows for an easier way to recall presets during runtime.

46 • QuickMedia™ Receiver/Processor: QM-RMCRX-BA Operations Guide - DOC. 6332

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 75 76

No comments

Crestron QM-RMCRX-BA Specifications Page 50