Crestron QM-RMCRX-BA Specifications Page 61
- Page / 76
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Crestron QM-RMCRX-BA QuickMedia™ Receiver/Processor
GENAUDIO - AUTOCOMP Signals (continued)
SIGNAL TYPE
AND NAME
DESCRIPTION
Digital output
<MuteMicMixOut-F>
Indicates the mute status of the AUDIO SPCH channel. The feedback will
remain high for as long as the output is muted.
High/1 = Audio is muted
Low/0 = Audio is un-muted
Digital input
<MuteProgLOut>
Mutes the AUDIO L channel for as long as the input is high.
High/1 (level-sensitive) = Mute AUDIO L
Low/0 = Un-mute audio
Digital output
<MuteProgLOut-F>
Indicates the mute status of the AUDIO L channel. The feedback will remain
high for as long as the output is muted.
High/1 = Audio is muted
Low/0 = Audio is un-muted
Digital input
<MuteProgROut>
Mutes the AUDIO R channel for as long as the input is high.
High/1 (level-sensitive) = Mute AUDIO R
Low/0 = Un-mute audio
Digital output
<MuteProgROut-F>
Indicates the mute status of the AUDIO R channel. The feedback will remain
high for as long as the output is muted.
High/1 = Audio is muted
Low/0 = Audio is un-muted
Digital input
<SaveCompPreset>
This signal has NO effect if automatic audio compensation is enabled.
Saves the source gain compensation defined by <ProgComp> to the preset
given by <Preset#> when the input is held high.
High/1 (level-sensitive) = Save compensation preset
Low/0 = No preset save
Digital input
<RecallCompPreset>
This signal has NO effect if automatic audio compensation is enabled.
Recalls the source gain compensation preset given by <Preset#> when the
input is held high.
The source gain compensation is added to program volume and is applied
equally to both the AUDIO L and R channels.
High/1 (level-sensitive) = Recall compensation preset
Low/0 = No preset recall
Digital input
<EnableAudioAutoComp>
Enables automatic audio compensation for as long as the input is high.
High/1 (level sensitive) = Enable auto-compensation
Low/0 = Disable auto-compensation
Analog input
<MicMixVol>
Adjusts the volume level on the AUDIO SPCH channel.
Valid values range from 0% (-80dB) to 100% (+20dB).
Analog output
<MicMixVol-F>
Indicates the volume level of the AUDIO SPCH channel.
Analog inputs
<MicMixBass>
<MicMixTreble>
Adjusts the treble and bass on the AUDIO SPCH channel.
Valid values range from 0% (-15dB) to 100% (+15dB).
A value of 50% signifies a flat level corresponding to 0dB.
Analog input
<MicMixDelay>
Sets the speech delay, in milliseconds, for the AUDIO SPCH channel.
Valid analog values range from 0d (0ms) to 40d (40ms).
Out of range values will clip the speech delay to the minimum or maximum
value.
Analog output
<MicMixDelay-F>
Indicates the speech delay being applied to the AUDIO SPCH channel.
Continued on the following page
Operations Guide – DOC. 6332 QuickMedia™ Receiver/Processor: QM-RMCRX-BA • 57
- Crestron QM-RMCRX-BA 1
- Operations Guide 1
- Contents 3
- QuickMedia™ 5
- Receiver/Processor: 5
- QM-RMCRX-BA 5
- QuickMedia Transport System 8
- CRESCAT-QM Cable 9
- System 10
- Specifications 11
- Physical Description 12
- QM-RMCRX-BA Rear View 13
- Physical Dimensions 13
- 24 Y Z G 14
- S-Video 15
- Composite Video 15
- Rear Panel Ports 15
- Audio Line Level (Outputs) 16
- COM (A & B) 16
- Industry Compliance 18
- Network Wiring 19
- QM Network Wiring 20
- Mounting 20
- Hardware Hookup 21
- Front Connections 22
- Rear Connections 22
- Ground Wire Connections 23
- Power Supply 23
- Crestron Toolbox 23
- Communication Settings 24
- Toolbox Message 29
- Identity Code 30
- Configuring the QM-RMCRX-BA 32
- SystemBuilder 33
- SystemBuilder – System View 35
- Audio and Video Adjustments 36
- Volume Settings 37
- Output Graphic EQ 38
- Parametric Equalization 39
- Video Settings 39
- Black and White Streaking 40
- Problem Solving 42
- System Monitor Mode 43
- Further Inquiries 44
- Future Updates 44
- System View of QM-RMCRX-BA 45
- Slot 1: C2I-RMC-IR1 46
- Slot 2: C2I-RMC-DI4 47
- SIGNAL TYPE 48
- AND NAME 48
- DESCRIPTION 48
- Slot 6: C2I-RXBA-VIDEO 50
- Slot 7: C2I-RX-MIXER 53
- Detail View of Audio Mixer 54
- Slot 9: C2I-RX-GRAPHICEQ 62
- Slot 10: C2I-RMC-FRONTPANEL 65
- Slot 12: C2I-RX-RY4 65
- Other Systems 66
- Advanced Console Commands 67
- Compensation 69
- Switchers 70
- QM-AE Audio Extractor 70
- Compatibility Charts 71
- Software License Agreement 73
- Return and Warranty Policies 75
Related products and manuals for Receiver Crestron QM-RMCRX-BA
Receiver Crestron SP-1 User Manual
(14 pages)
(14 pages)
Receiver Crestron SP-1 Specifications
(24 pages)
(24 pages)
Receiver Crestron ABVR-1 Specifications
(16 pages)
(16 pages)
Receiver Crestron CNXRMIRD Specifications
(36 pages)
(36 pages)
Receiver Crestron SP-1 User Manual
(14 pages)
(14 pages)
Receiver Crestron CNXRMIRD User Manual
(12 pages)
(12 pages)
Receiver Crestron QM-RMCRX-BA User Manual
(13 pages)
(13 pages)
© 2020, manymanuals.com. All rights reserved. | 0.657 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals