Crestron QM-RMCRX-BA Specifications download pdf (Page 62)

QuickMedia™ Receiver/Processor Crestron QM-RMCRX-BA

GENAUDIO - AUTOCOMP Signals (continued)

SIGNAL TYPE

AND NAME

DESCRIPTION

Analog input

Adjusts the volume level on the AUDIO L channel.

Valid values range from 0% (-80dB) to 100% (+20dB).

Analog output

<ProgVolL-F>

Indicates the volume level of the AUDIO L channel.

Analog input

Adjusts the volume level on the AUDIO R channel.

Valid values range from 0% (-80dB) to 100% (+20dB).

Analog output

<ProgVolR-F>

Indicates the volume level of the AUDIO R channel.

Analog inputs

Adjusts the treble and bass on the AUDIO L and R channels.

Valid values range from 0% (-15dB) to 100% (+15dB). The treble and bass are

applied equally to both channels.

A value of 50% signifies a flat level corresponding to 0dB.

Analog input

<Preset#>

This signal has NO effect if automatic audio compensation is enabled.

Sets the compensation preset number that will be recalled when

<RecallCompPreset> is held high.

Valid values range from 1d to 192d. Out of range values are ignored.

Analog input

This signal has NO effect if automatic audio compensation is enabled.

Sets the source gain compensation that will be saved to the preset given by

<Preset#> when <SaveCompPreset> is held high.

Valid analog values range from -100d (-10dB) to +100d (+10dB), adjustable in

increments of 0.1dB (1d = 0.1dB).

A value of 0d (0dB) means that the signal will pass unaffected.

Out of range values will clip the compensation to the minimum or maximum

value.

Analog output

<ProgComp-F>

Indicates the current source gain compensation.

Slot 9: C2I-RX-GRAPHICEQ

The C2I-RX Graphic EQ module is built into slot 09 of the QM-RMCRX-BA

QuickMedia control system and audio/video receiver.

The QM-RMCRX-BA provides graphic and parametric equalization for each of

the three audio output channels: Program Left, Program Right and Speech audio

(Mic Mix Out). The parametric equalizer and fixed frequencies of the graphic

equalizer can only be programmed using SystemBuilder.

The QM-RMCRX-BA provides 12 filters per output, with a maximum of 10

filters available for graphic EQ. The QM-RMCRX-BA provides five modes of

audio equalization (settable using SystemBuilder).

• 10 bands graphic EQ + 2 band parametric EQ. In this mode, the first 10

filters of the three channels are used to set up the fixed frequencies for

graphic equalization, leaving filters #11 and #12 available for

parametric EQ.

• 3 bands graphic + 9 bands parametric

• 5 bands graphic + 7 bands parametric

• 5 bands graphic + 7 bands parametric, with speech optimization

• 12 bands parametric (0 bands graphic)

58 • QuickMedia™ Receiver/Processor: QM-RMCRX-BA Operations Guide - DOC. 6332

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 75 76

Comments to this Manuals

No comments

Crestron QM-RMCRX-BA Specifications Page 62

Comments to this Manuals

Related products and manuals for Receiver Crestron QM-RMCRX-BA