Crestron TPMC-8T Specifications download pdf (Page 29)

Crestron TPMC-8T-GA 8.4” TableTop WiFi Touch Screen

Operations Guide – DOC. 7262F 8.4” TableTop WiFi Touch Screen: TPMC-8T-GA

•

From either the numeric or the symbol keyboard, touch the key to

return to the alpha keyboard.

The initial position of the on-screen keyboard is determined by the VT Pro-e

program or Crestron Studio or SIMPL Windows settings. The on-screen keyboard

defaults to its largest size.

When the on-screen keyboard is moved or resized and then closed, it re-opens at the

same position and size it was when closed. This position and size remain in memory

until the touch screen is re-booted or it is re-set by the Crestron Studio or SIMPL

Windows program. After reboot, the position of the on-screen keyboard reverts to

the default position set in the VT Pro-e, Crestron Studio or SIMPL Windows

program. The size reverts to the largest as determined by the firmware installed in

the touch screen.

Exit the on-screen keyboard by touching the red close button in the upper right

corner of the keyboard window. If the Keyboard button on the setup menu is still

visible, it can also be touched to exit the keyboard.

Diagnostic

Touch Diagnostic to display the firmware version number, view Installed Packs

and to reset the end user license from the Diagnostics window.

Diagnostics Window

Reset CTP Port resets the default value of the CTP port to 41795, for terminal

connection using Crestron Toolbox.

To configure the appearance of popup messages and passcode messages, touch

Configure Messages. The Message Configurations Properties window opens.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 55 56

No comments

Crestron TPMC-8T Specifications Page 29