Crestron TPS-IMC User Manual download pdf (Page 3)

Crestron TPS-IMC Interface Module

Operations Guide - DOC. 5856 Interface Module: TPS-IMC •• 1

Interface Module: TPS-IMC

Description

Functional Description

The TPS-IMC is designed specifically to serve as an interface module for the Crestron TPS-

5000 and TPS-6000 tilt touchpanels. The sleek design of the touchpanel base left little room

for all the connectors that define the touchpanel's versatility. Furthermore, since the panel is

not a stationary user interface, it is impractical to have an excessive amount of cable

connections directly to the touchpanel. As a result, it was necessary to connect the touchpanel

to an interface module that could offer additional space for interconnections.

Physical Description

The TPS-IMC, shown on the next page, is supplied with every TPS- tilt touchpanel. The

module is housed in a black enclosure with silk-screened top panel. A network connector and

video input connectors are located on one side of the unit. The opposite side offers audio

input, microphone output, and audio/network/video connections to the touchpanel. At the

shorter sides of the TPS-IMC, the enclosure extends to form feet at a right angle to the side.

There are three holes per foot for inserting screws to further stabilize the unit to a mounting

surface.

I/O Ports

There are eight I/O ports available on the TPS-IMC. Refer to the diagram on the next page

and the following bulleted items for descriptions of each port.

• NTSC/PAL VIDEO – These three ports are made active with the purchase and

installation of the TPS-VID, composite and S-video input for TV video card.

Consult the latest revision of the TPS-VID Operations & Installation Guide (Doc.

5869) for details. Use either the two BNC connectors or the six-pin connector

when connecting to a video source.

NOTE: Except for differential input (balanced) video signal, the six-pin video

connector with jumpers should be installed at all times.

1 2 3 4 5 6 7 8 ... 11 12

No comments

Crestron TPS-IMC User Manual Page 3