Crestron TPS-IMC User Manual download pdf (Page 4)

Interface Module Crestron TPS-IMC

2 •• Interface Module: TPS-IMC Operations Guide - DOC. 5856

Physical Views of the TPS-IMC

NOTE:

The positions of the

NET/VIDEO and AUDIO

ports on early production

models were reversed

(compared to the

illustration at right).

Observe the exact

screening on the

TPS-IMC before making

any connections.

CRESTRON

TPS - IMC

NET

AUDIO

PANEL

AUDIO

INPUT

1.240 in

(3.150 cm)

MIC

OUT

_ _

VIDEO

NET/

2.000 in

(5.080 cm)

COMP

0.250 in

(0.635 cm)

NTSC/PAL VIDEO

COMP

5.325 in

(13.526 cm)

4.820 in

(12.243 cm)

0.750 in

(1.905 cm)

0.235 in

(0.597 cm)

0.750 in

(1.905 cm)

• NET – This four-pin connector is used to connect to other four-wire devices in

the Cresnet system. If making network connections to Cresnet peripherals, refer

to the latest revision of the Cresnet Network Interconnect Drawing (Doc. 5411).

This document can be obtained from the Downloads page (CABLES and

MANUAL Libraries) of the Crestron website (www.crestron.com). Search for

CRESNET.PDF.

• AUDIO – This 8-position RJ45 mates with the TPS-5000 or TPS-6000

touchpanel. The 8-position audio cable assembly is supplied. Even though it may

fit, do not use the 10-position net/video cable.

This port provides audio input to the touchpanel and mic out from the touchpanel

to audio amplifiers. Description of the pinouts is shown in the table after this

paragraph.

AUDIO Pinouts

PIN # DESCRIPTION

1 Audio Shield

2 Audio Left +

3 Audio Left -

4 Audio Right +

5 Audio Right -

6 Mic Out Shield

7 Mic Out +

8 Mic Out -

1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Crestron TPS-IMC User Manual Page 4

Comments to this Manuals

Related products and manuals for Networking Crestron TPS-IMC