Digital Video Processor Crestron C2N-DVP4DI
1. From the Crestron Viewport, select Functions | Set Control System IP
Information. The “Set Control System IP Address” window opens.
Set IP Information Via Viewport
As shown in the following illustration, the C2N-DVP4DI does not have an IP
address assigned to it.
IP Address Window
2. Refer to the following table and enter the network IP values.
NOTE: If an invalid IP address is entered, the subnet mask may be CHANGED
AUTOMATICALLY BY THE EQUIPMENT to an appropriate subnet mask.
NOTE: To TURN OFF the TCP/IP stack, an IP address of 0.0.0.0 can be entered;
no IP Mask or Default Router would be required.
You must enter a complete IP
address and IP Mask for the
C2N-DVP4DI to operate on the
network.
Reference Guide – DOC. 6177A
22 • Contents
Comments to this Manuals