Crestron C2N-DVP4DI Specifications Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 114
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
Digital Video Processor Crestron C2N-DVP4DI
C2N-DVP4DI Specifications (continued)
SPECIFICATION DETAILS
Rack Space 2 units high, 1 unit wide
Environmental
Temperature
41° to 113°F (5° to 45°C)
Environmental
Humidity
10% to 90% RH (non-condensing)
Dimensions and
Weight
Height: 3.47 in (8.82 cm)
4
Width: 17.03 in (43.25 cm)
Depth: 12.10 in (30.74cm)
Weight: 7.8 lb (3.5 kg)
1. Crestron recommends that the C2N-DVP4DI be the only device connected to the Crestron
power supply (CNPWS-75, not included). Do not use a 2-Series system (AV2, PRO2, etc.) as a
power source. Because of surge current, do not use a power supply smaller than 75 watts.
2. TMDS (Transmission Minimized Differential Signaling) is a transmission method for sending
digital information to a flat panel display. TMDS is a variation of LVDS (Low Voltage
Differential Signaling), the standard interface used for notebook PCs.
3. You can also use a Logitech MouseMan compatible 3-button serial mouse. PS2/serial (or USB)
mouse is incompatible, even with a 9-pin adapter. Refer to “Connecting a Pointing Device” on
page 60 for additional mouse installation information.
4. The C2N-DVP4DI occupies two rack spaces. Crestron recommends allowing ventilation above
and below the unit.
NOTE: Crestron
®
software and any files on the website are for Authorized Crestron
dealers only. New users may be required to register to obtain access to certain areas
of the website (including the FTP site).
Physical Description
The C2N-DVP4DI, shown in the following illustration, is housed in a black metal
enclosure. All RS-232, video, LAN, and Cresnet
®
connectors are on the back panel.
The supplied racking mounting ears can be attached at the shorter sides of the unit.
Two holes per ear are for inserting the rack mounting screws. The ears can be
removed to reduce the size of the C2N-DVP4DI. If the ears are removed, the
provided rubber feet can be mounted on the under side to stabilize the unit on a flat
surface. The front panel has a PWR (green) LED and a NET (yellow) LED. The
PWR LED illuminates when power is applied to the unit. When functioning in the
master mode, the NET LED blinks when transmitting or receiving data from Cresnet.
When functioning as a slave, this LED blinks when the unit is polled. This will
generally be frequent enough to appear to be on steady.
Reference Guide – DOC. 6177A
4 Contents
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 113 114

Comments to this Manuals

No comments