Crestron C2N-DVP4DI Specifications download pdf (Page 36)

Digital Video Processor Crestron C2N-DVP4DI

Ethernet touchpanels. To add a device to the system expand the C2ENET-1 slot and

double-click the desired IP ID, or right-click and select Add Item from the submenu.

Then select the device you want to add.

In Program Manager, the C2ENET-1 symbol contains no signals; to program a

controlled Ethernet device, expand the C2ENET-1 symbol in Program View. Then

drag the symbol to Detail View. (Alternatively, you can double-click the symbol.)

Slot 5: Front Panel

Slot 5 is a physical representation of the built-in front panel. No programming is

required.

Remote Processing Mode (Slave Mode)

In the Remote Processing mode, the C2N-DVP4DI does not contain a main control

system program. The program is installed in another 2-Series control system acting

as the host. The slots and Cresnet devices are accessed solely from the host control

system that generates all the proper network packets to control the hardware. For

example, to utilize a C2N-DVP4DI as a peripheral for a PRO2, C2N-DVP4DI

Remote Cresnet Processing is dropped on the C2Net slot (09) of the PRO2. The

C2N-DVP4DI device appears in the Program View as ID 54 as shown in the

following illustration.

Remote Processing Mode C2N-DVP4DI in SIMPL Windows’ Program View of the PRO2

When adding other devices to the system, right-click the device symbol in System

View, select Configure, the Net ID tab, and select or enter the desired Net ID.

Slot 2: C2I-COM5-232 of ID 54 contains Ports A-E, C2N-DVP4DI Two-way serial

drivers (A-D are for Com 1-4 ports, E is for Touchscreen/Mouse port). To change

RS-232 settings, double-click on a port to open the “Device Settings” window.

Slot 2: C2I COM5-232

Reference Guide – DOC. 6177A

32 • Contents

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 113 114

No comments

Crestron C2N-DVP4DI Specifications Page 36