Crestron C2N-DVP4DI Specifications download pdf (Page 41)

Crestron C2N-DVP4DI Digital Video Processor

• There are four RGB, twelve composite video and four component video

sources available, but the C2N-DVP4DI only displays four sources at the

same time. If you have programmed four sources to display, and are

changing to just one source, a fifth source is required. (If you use the same

video more than once, it is still counted as a separate source.) The C2N-

DVP4DI will fade down one of the existing four sources, depending on the

source selected, and then transition the new source on, while removing the

existing sources.

• The Video/RGB Windows on the C2N-DVP4DI are not unique. You can

use either the RGB or video object for RGB, S-video, component, and

composite.

• The background graphic and color are always drawn first, followed by the

video object. Any other objects are placed on top. This includes the

backgrounds of sub-pages. The order of object placement is the same as in

VT Pro-e.

• The project resolution must be the same as the output resolution of the

C2N-DVP4DI for video to function correctly. Example: 800 x 600 on both

the output of the C2N-DVP4DI and the VT Pro-e Project.

• If you change the output resolution of the C2N-DVP4DI, then you must

recalibrate the touch input.

Configuring Video Windows

Video windows created on a page can be configured using the Video Properties

option. Once a video window is created using the Draw | RGB window or

Draw | Video window options, double-click the video window to open “RGB

Video Properties” or “Video Properties” so you can configure the window.

Joins – are analog values that allow the user to select different video sources,

transition durations, and transition effects and directions, using analog joins to

be displayed on one video window (overrides the set defaults in VT Pro-e). You

may also use joins to change source, transition and duration. The primary

advantage of using joins in this manner comes from the fact that the C2N-

DVP4DI does not have to load a background page first as in a page flip or a sub

page. The source change occurs rapidly after the digital press.

NOTE: Overriding analog join numbers can result in two pages with the same join

number. In this case, page flips between them will not function.

Changing Size and Position of Video and/or RGB Sources

using Analog Joins

The C2N-DVP4DI has the ability to change the size and position of any video/RGB

window on command. Use VT Pro-e to change the window size and position on-the-

fly by programming analog join numbers for height, width, left, and top. These

selections are under the Select Property to Modify located in the lower left corner of

the Source tab in of the RGB Video Properties window. This property affects RGB,

DVI, composite, S-video and component video.

Procedure

1. Draw a video or an RGB window.

2. Select the properties for that object.

Reference Guide – DOC. 6177A Digital Video Processor: C2N- DVP4DI • 37

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 113 114

Comments to this Manuals

No comments

Crestron C2N-DVP4DI Specifications Page 41

Comments to this Manuals

Related products and manuals for Processors Crestron C2N-DVP4DI