Crestron C2N-DVP4DI Specifications download pdf (Page 16)

Digital Video Processor Crestron C2N-DVP4DI

TCP/IP Connection

Before you can communicate with the C2N-DVP4DI over TCP/IP, you must use the

RS-232 connection just described to configure the unit’s TCP/IP settings.

1. Open Viewport and click Functions | Set Control System IP Information.

2. Enter the IP address, IP mask and default router in the text fields. (All of

these terms are explained in detail in the latest version of the Crestron

e-Control Reference Guide (Doc. 6052), available as a PDF on the

Downloads | Product Manuals section of the Crestron website

(www.crestron.com).

3. Click OK to set the new IP information.

Once you have assigned the IP settings, you can continue to communicate with the

C2N-DVP4DI using the RS-232 connection, or you can establish a TCP/IP

connection.

For TCP/IP, use CAT5 cables with 8-pin RJ45 connectors to connect the LAN port

on the C2N-DVP4DI and the LAN port on the PC to the Ethernet hub. Alternatively,

you can use a CAT5 crossover cable to connect the two LAN ports directly, without

using a hub.

The following figure illustrates pinouts for straight through and crossover RJ-45

cables. Pins 4, 5, 7, and 8 are not used.

RJ-45 Pinouts

Once the cable connections are made, open the Crestron Viewport and click Setup |

Communication Settings on the menu to display the “Port Settings” window. Then

click TCP/IP as the connection type. Enter the IP address of the C2N-DVP4DI and

click OK.

To verify communication, click Diagnostics | Establish Communications (Find

Rack). This should display a window that gives the IP address and port number.

If communication has not been established, check for proper cabling and connection.

Ensure that the Ethernet is enabled on the C2N-DVP4DI by checking the

“Diagnostics Menu” (refer to page 18).

Configuring the C2N-DVP4DI

To configure the C2N-DVP4DI, a series of setup screens must be accessed before

viewing run-time video windows on a display device (projector, plasma display,

etc.). These screens are accessed from the setup option on the MAIN MENU.

Operations Guide – DOC. 6112

12 • Digital Video Processor: C2N-DVP4DI

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

No comments

Crestron C2N-DVP4DI Specifications Page 16