Crestron C2N-DVP4DI Specifications download pdf (Page 17)

Crestron C2N-DVP4DI Digital Video Processor

NOTE: Due to the complexities of the C2N-DVP4DI, it may take approximately 25

seconds to reboot.

NOTE: Throughout this manual, the phrase “Video Source” means all of the

following: S-video, composite video, component video, RGB, or DVI sources, unless

otherwise specified.

The following are the configuration prerequisites:

• Display device connected to the output DVI/RGB port. If display connector

is VGA, 15-pin, use the supplied DVI-I/RGB adapter.

• Minimum of one video input, connected to the input DVI/RGB, S-video,

composite, or component port. If the video source connector is VGA, 15-

pin, use the supplied DVI-I/RGB adapter.

• Cresnet power (from Cresnet power supply) connected to the Cresnet port.

• A touchscreen and a serial mouse connected to the touchscreen/mouse port

are required to use the setup screens.

• Test pattern screens (third party application): Color bar, grid, gray scale and

vertical line pattern test screens.

• PC connected to the C2N-DVP4DI with Viewport open.

Open the MAIN MENU by doing one of the following:

1. While the C2N-DVP4DI is powering up, hold down the left mouse button,

or with a touchscreen, hold a finger to the touchscreen until the MAIN

MENU screen opens (If using a mouse, the mouse must be moved while the

C2N-DVP4DI is starting).

2. If the compact flash is not installed or the installed compact flash is blank,

you will be prompted to touch (or click with a cursor) the screen to open the

MAIN MENU.

3. If the compact flash is installed with a loaded program, open Viewport,

connect to the C2N-DVP4DI (refer to “Establishing Communication with

the C2N-DVP4DI” on page 10) and type setup at the DVP4> (master)

prompt, CSLAVE_DVP4DI> (slave) prompt, or ESLAVE_DVP4DI>

(Ethernet slave) prompt.

Main Menu

Operations Guide – DOC. 6112 Digital Video Processor: C2N-DVP4DI • 13

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

No comments

Crestron C2N-DVP4DI Specifications Page 17