Crestron C2N-DVP4DI Specifications download pdf (Page 37)

Crestron C2N-DVP4DI Digital Video Processor

Page Flip (Page B changing position only)

Page A

Page B

 The C2N-DVP4DI uses either the default timing or analog value from VT

Pro-e for the duration of the on-screen to on-screen transition. Duration is

not set in this menu.

 The on-screen to on-screen effect applies to all sources (RGB, DVI, S-

video, component video, and composite video).

 For the new size and position option to operate, the vertical frequency of the

RGB sources must be the same as the C2N-DVP4DI output vertical

frequency. Otherwise the C2N-DVP4DI defaults to the fade down/fade up

effect, overriding the SETUP | OPTION setting.

 Video sources are scaled to the C2N-DVP4DI output resolution and

frequency so they will allow the stretch effect to work.

The Default Video buttons (NTSC and PAL) permit a choice of which kind of video

is searched for first, and works for both composite and S-video. For example: If

NTSC is selected, the C2N-DVP4DI searches for NTSC first, and then searches for

PAL.

Translucent Objects

This MAIN MENU TRANSLUCENT OBJECTS option allows the user to change

the translucency of displayed buttons. The default is 50% transparent. 100% is

invisible, 0% is opaque (refer to following graphic).

NOTE: Setup screens are always displayed as 800 x 600. When the buttons are full

off (100% transparent), pressing anywhere within this 800 x 600 setup page returns

the buttons to 50% translucency. This disappearing button feature is very useful

when fine-tuning color, size, etc.

Translucency

Operations Guide – DOC. 6112 Digital Video Processor: C2N-DVP4DI • 33

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

No comments

Crestron C2N-DVP4DI Specifications Page 37