Crestron TPS-RFGWX Specifications download pdf (Page 17)

Crestron TPS-RFGWX Two-Way RF Transceiver

Operations Guide - DOC. 5847A Two-Way RF Transceiver: TPS-RFGWX • 13

Communication Settings

NOTE: For laptops and other PCs without a built-in RS-232 port, Crestron

recommends the use of PCMCIA cards, rather than USB-to-serial adapters. If a

USB-to-serial adapter must be used, Crestron has tested the following devices with

good results:

Belkin (large model) F5U103

I/O Gear GUC232A

Keyspan USA-19QW

Other models, even from the same manufacturer, may not yield the same results.

The procedure in this section provides details for RS-232 communication between

the PC and the control system. If TCP/IP communication is preferred, consult the

latest version of the Crestron e-Control Reference Guide (Doc. 6052) or the

respective Operations Guide for the control system. These documents are available

from the Downloads | Product Manuals section of the Crestron website

(www.crestron.com). Refer to the figure below for a typical connection diagram

when uploading files.

Note: Use a standard DB9 male to female “straight-through” cable.

Typical Connection Diagram when Establishing Communication

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

No comments

Crestron TPS-RFGWX Specifications Page 17