Crestron TPS-RFGWX Specifications download pdf (Page 20)

Two-Way RF Transceiver Crestron TPS-RFGWX

16 • Two-Way RF Transceiver: TPS-RFGWX Operations Guide - DOC. 5847A

5. To determine the equipment on the network, select Diagnostics |

Report Network Devices from the Viewport menu bar. The screen

lists the equipment, as shown in the following simplified example,

and shows the TPS-RFGWX’s RF ID, its firmware version, the RF

channel setting, the power setting, and the band setting.

Example Equipment Listing Report

6. As shown in the “Select Network ID” window, select the NET ID of

the TPS-RFGWX, and then click OK. The “Open” window appears

(refer to the graphics below).

“Select Network ID” Window

NOTE: When transferring a Cresnet file (touchpanel project/ firmware), make sure

the port speed baud rate is set to 38400 to match the Cresnet bus speed.

“Open” Window

4. Browse to the desired [filename].csf file and click Open to begin the

transfer.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Crestron TPS-RFGWX Specifications Page 20