Crestron TPS-RFGWX Specifications Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Crestron TPS-RFGWX Two-Way RF Transceiver
Operations Guide - DOC. 5847A Two-Way RF Transceiver: TPS-RFGWX 3
If you have two or more Crestron wireless RF devices in the Cresnet system, they
should all be set to the same band. If your system includes non-Crestron RF devices,
set the Crestron RF devices to a different band than the non-Crestron devices to
minimize the possibility of interference between them.
Touchpanel Compatibility
The ability to select frequency bands makes it possible for the TPS-RFGWX
gateway to communicate with touchpanels that are Wi-Fi friendly, such as the STX-
1700CXP, as well as those that are not. Gateways that are Wi-Fi-friendly (include
band selection) have product labels that include a seven-digit number beginning with
600 (e.g., 6002104). Product labels on earlier models of the gateway (fixed band; not
Wi-Fi friendly) included seven-digit alphanumeric codes beginning with ZA (e.g.,
ZA11308). Similarly, Wi-Fi friendly gateways can communicate with touchpanels
that are not so enabled as well as those that are. In either case, in order to
communicate, the gateway and touchpanel must be set to the same band and have
identical identity code settings (refer to “Identity Codes” on page 8 for details).
Specifications
The table below is a summary of specifications for the TPS-RFGWX.
Specifications of the TPS-RFGWX
SPECIFICATION DETAILS
Power Requirements 3 Watts (24VDC @ 0.125A)
Communications Bidirectional Spread Spectrum 2.4 GHz (2400 to
2483 MHz), transmit power 100 mW
Operating Ranges¹
Minimum Distance
Maximum Distance Indoors
Maximum Distance Outdoors
3 ft
100 ft to 200 ft
1000 ft
RF Specifications Bidirectional Spread Spectrum 2.4 GHz (range
approximately 100 - 200 feet). Requires one
TPS-RFGWX transceiver per 15 touchpanels.
Default Net ID 52
Default Channel ID 0 (Identifies the RF gateway to the
touchpanels used for communication)
Default RF Band Band 0 (USA original) Ten frequency bands
(ranges) available for selection.
Control System Update Files
2, 3
2-Series Control System Update
CEN/CN-TVAV Update File
CNMSX-AV/Pro Update File
CNRACKX/-DP Update File
Version C2-3.044.CUZ or later
Version 5.12.63V.UPZ or later
Version 5.14.02X.UPZ or later
Version 5.14.02W.UPZ or later
Acceptable file extensions
.csf
TPS-RFGWX.vx.xxx.x.csf (transceiver
firmware)
TPS-RFGWX firmware Version 2.15 or later
Dimensions Width: 1.70 in (4.32 cm)
Height: 7.07 in (17.95 cm)
Depth: 6.32 in (16.06 cm)
Weight 2.38 lb (0.93 kg)
1 The location of the TPS-RFGWX and the orientation of the antenna are important factors in the RF
performance. With the unit located outside of any metal enclosures, the antenna is adjusted to
achieve the best range. The range is dependent on its placement and the building in which it is used.
The construction of the building, obstructions, and RF interference from other devices are factors
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments