Crestron CNX-B4 Installation Guide download pdf (Page 14)

Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12

10 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A

5. Select the new NET ID for the keypad from the Choose the

new network ID for the selected device (Hex): text box.

6. Click Set ID to initiate the change. This will display the "ID

command has been sent" window.

7. In the "Command Complete" window, click OK.

8. In the Current Network Devices text window, verify the new

NET ID code.

9. In the "Set Network ID" window, click Close.

NOTE: The new NET ID code may also be verified by selecting

Diagnostic | Report Network Devices in the Viewport (alternately,

select F4).

10. Repeat this procedure for each keypad to be added to the

system.

Method B (Touch Settable IDs)

Before using this method, you should have a list of all current network

devices and their Net IDs, to avoid assigning duplicate IDs.

Set Net ID via D3 Pro

Version 1.0 of this program includes procedures that enable setting the

Net ID by touching any button of a set of keypads. Refer to the extensive

help information provided with the software file for instructions.

Set Net ID by TSID

These procedures are for TSID-enabled network devices during the initial

configuration of a Cresnet system or when such devices are being

added/replaced.

1. Ensure that all keypads are connected to the control system.

2. Open the Crestron Viewport version 3.35 or later.

3. From the Viewport menu, select Functions | Assign Cresnet

ID by Serial Number. The “Set Net ID by TSID” window

appears. The window is first displayed with the data fields

empty.

• When you click on the Search for Touch Settable

Devices button, the system searches the network and lists

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

No comments

Crestron CNX-B4 Installation Guide Page 14