Crestron Adagio ATC-AMFMSR Specifications download pdf (Page 26)

Entertainment System Crestron Adagio™ AES

AES MODEL REQUIRED FUSE TYPE

AES

(US & Canada)

T8AH (¼” x 1¼”, 250V, 8A,

time-lag, high-rupture rated)

AESI

(International/230VAC)

T4AH (5mm x 20mm, 250V, 4A,

time-lag, high-rupture rated)

• Insert the fuse holder into the AES.

• Push in the fuse holder with a flat head screwdriver. While pushing in the

fuse holder, turn the screwdriver clockwise until the fuse holder sinks in.

• Push in the fuse holder a little further and turn the screwdriver clockwise

until the fuse holder locks in place.

• Connect power to the AES.

Room & Preset Group Button

Labels

Use Adagio Composer or Crestron Engraver software to create and print custom

labels on overhead transparency film for the AES’ room buttons and preset group

buttons.

NOTE: When printing custom labels, some experimentation may be required for

optimum results.

Custom-engraved labels can also be ordered from Crestron. Contact Crestron for

more information.

To remove the label:

1. Remove the label cover with a small, flat-head screwdriver. The label cover

is magnetically attached to the front panel of the Adagio component. The

label strip will be exposed.

2. Insert the screwdriver behind the label strip as shown in the diagram below.

22 • Entertainment System: Adagio AES Operations Guide – DOC. 6456B

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 79 80

No comments

Crestron Adagio ATC-AMFMSR Specifications Page 26