Crestron Adagio ATC-AMFMSR Specifications download pdf (Page 28)

Entertainment System Crestron Adagio™ AES

Configuration

After making all hardware connections to the AES, the system must be configured

for operation.

Configuring the system is broken down into four processes:

• Configure the AES for Operation

• Configure Sources

• Configure Rooms

• Configure Preset Groups

Configure the AES for Operation

The AES must be configured for operation prior to configuring sources, rooms, or

groups. Use the Installer Tools to configure the AES for operation.

NOTE: If a custom program was created with Adagio Composer or SystemBuilder,

the following is not required.

Open Installer Tools

• Press and hold the ROOM and SOURCE buttons for 10 seconds to open

the Installer Tools menu.

Installer Tools Menu

Installer Tools

Select Tuner Format

Configure Network

Set Number of Rooms

SOURCE

ROOM

HOUSE

BKLT

SCHED

DISPLAY

• Scroll through the list of available options using the selection knob. The

selected option will be underlined. Available options are:

⇒

Select Tuner Format – Specifies the North American or European

tuning format when using a tuner card.

Configure Network – Configures the AES to communicate with

devices that are connected to the AES over Ethernet.

Set Number of Rooms – Sets the number of rooms to be controlled

by the AES.

Name Rooms – Allows custom naming of rooms controlled by the

AES.

Name Sources – Allows custom naming of audio sources

connected to the AES.

Hide Sources – Allows sources to be removed from the source list.

Identify Keypads – Registers APAD devices and C2N-DBF12

keypads that are connected to the system.

24 • Entertainment System: Adagio AES Operations Guide – DOC. 6456B

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 79 80

Comments to this Manuals

No comments

Crestron Adagio ATC-AMFMSR Specifications Page 28

Comments to this Manuals

Related products and manuals for Receiver Crestron Adagio ATC-AMFMSR