Crestron CEN-SWPOE-24 Specifications download pdf (Page 19)

Crestron CEN-SWPOE-16 16-Port Managed PoE Switch

Operations Guide – DOC. 7408B 16-Port Managed PoE Switch: CEN-SWPOE-16

•

Device Settings

Select Device Settings in the navigation menu to make changes to DHCP settings, IP

addresses, DNS settings and login information, or to reboot the switch.

“Device Settings” Screen

DHCP

The default configuration of the switch allows its IP address to be automatically

assigned by a DHCP (Dynamic Host Configuration Protocol) server on the local area

network. If a DHCP server does not exist on the network and two minutes have

elapsed since power was applied to the switch, the IP address of the switch defaults

to 0. Edit the DHCP settings in the DHCP section of the “Device Settings” screen.

DHCP Settings

The following options are available:

• Enable DHCP: If this option is checked, an IP address is obtained from a

DHCP Server (Dynamic Host Configuration Protocol). If DHCP is enabled,

IP does not function until a reply has been received from the server.

Requests are broadcasted periodically by the switch for an IP address.

DHCP values can include the IP address, subnet mask, and default gateway.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

No comments

Crestron CEN-SWPOE-24 Specifications Page 19