Crestron TPS-3000 Specifications download pdf (Page 16)

Crestron Quick Guide to Touchpanel Connections

Doc. 4903B

RJ-45 QuickMedia Connector Pin Assignments

RJ-45 Pin

Number

Wire colors

(EIA 568B)

QM ASSIGNMENT COMPOSITE,

S-VIDEO, COMPONENT and AUDIO

RJ-45 MALE CONNECTOR

1 WHITE/ORANGE - CHROMINANCE (- P

)

2 ORANGE + CHROMINANCE (+ P

)

3 WHITE/GREEN - LUMINANCE (- Y)

4 BLUE + AUDIO

5 WHITE/BLUE - AUDIO

6 GREEN + LUMINANCE (+ Y)

7 WHITE/BROWN - COMPOSITE (- P

)

8 BROWN + COMPOSITE (+ P

)

VIDEO IN

This eight-pin RJ-45 connection provides connectivity to the CNX-PVID or the TPMC-CH-

IMC interface module.

This port provides component, composite or S-video balanced input to the touchpanel

over Crestron Certified Wiring. Description of the pinouts is shown in the following table.

A cable for this connection is provided with the touchpanel.

CAUTION: Only use the TPMC-CH-IMC Interface Module when connecting this port. Use of other “IMC” products could damage

the panel. Earlier IMC modules were equipped with a proprietary 10-pin RJ cable. If this is inadvertently connected to the

8-pin RJ-45 connector the panel will be damaged.

NOTE: Only one video source may be displayed at a time.

Video In Pin Assignments

PIN WIRE COLORS (568B) COMPOSITE S-VIDEO COMPONENT

1 WHITE/ORANGE + Composite + Luminance + Y

2 ORANGE - Composite - Luminance - Y

3 WHITE/GREEN N/A + Chrominance + P

4 BLUE N/A N/A + P

5 WHITE/BLUE N/A N/A - P

6 GREEN N/A - Chrominance - P

7 WHITE/BROWN N/A N/A N/A

8 BROWN N/A N/A N/A

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

No comments

Crestron TPS-3000 Specifications Page 16