Crestron TPS-3000 Specifications download pdf (Page 9)

Crestron Quick Guide to Touchpanel Connections

Doc. 4903B 5

TPMC-8X-DSW

POWER

One 2-pin 3.5 mm detachable terminal block

24 Volt DC power input

Wire size: 18 AWG maximum

24 VDC

NOTE: If the TPMC-8X-DSW is to be fed power from a Cresnet bus (the 24 and G lines), be sure that the Cresnet data lines (Y

and Z) are not connected to the TPMC-8X-DSW, nor shorted together, to ground or to any metal surface. Be sure to isolate

them properly and prevent them from shorting to anything.

NOTE: The maximum continuous current from equipment under any external load conditions shall not exceed a current limit

that is suitable for the minimum wire gauge used in interconnecting cables. The ratings on the connecting unit's supply input

should be considered to prevent overloading the wiring.

LAN

One 8-wire RJ-45 with 2 LED indicators

10/100BaseT Ethernet port

Green LED indicates link status

Yellow LED indicates Ethernet activity.

PIN SIGNAL PIN SIGNAL

1 TX + 5 N/C

2 TX - 6 RC -

3 RC+ 7 N/C

4 N/C 8 N/C

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 59 60

No comments

Crestron TPS-3000 Specifications Page 9