Crestron TPS-3000 Specifications download pdf (Page 5)

Crestron Quick Guide to Touchpanel Connections

Doc. 4903B 1

Introduction

This document contains detailed hookup information for the current line of Crestron touchpanels.

Additional information may be found in the specific operations manual for each product, refer to the

Crestron website (www.crestron.com).

CAUTION: Do not apply excessive pressure to the touchscreen display during handling. Doing so can

crack the screen and damage the touchpanel.

NOTE: To prevent overheating, do not operate this product in an area that exceeds the environmental

range: Temperature: 41° to 113°F (5° to 45°C), Humidity: 10% to 90% RH (non-condensing).

Consideration must be given if installed in a closed or multi-unit rack assembly since the operating

ambient temperature of the rack environment may be greater than the room ambient.

NOTE: The maximum continuous current from equipment under any external load conditions shall not

exceed a current limit that is suitable for the minimum wire gauge used in interconnecting cables.

The ratings on the connecting unit's supply input should be considered to prevent overloading the

wiring.

1 2 3 4 5 6 7 8 9 10 ... 59 60

No comments

Crestron TPS-3000 Specifications Page 5