Crestron TPS-3000 Specifications download pdf (Page 26)

Crestron Quick Guide to Touchpanel Connections

Doc. 4903B

TPS-3000 and TPS-4000

NOTE: TPS-3000 and TPS-4000 include a TPS-IMPC Interface Module for system connection. Refer to page 24 for hookup

details.

NOTE: The audio connectors are color-coded blue.

Hardware connections for the TPS-3000 and TPS-4000 (Back of the base is shown)

HEADPHONES

Connect this standard mini phone jack (12 mW, 32 ohms load) to the plug of an external headphone set,

not supplied. The headphone output is for WAV and Line only. It does not send out the microphone signal.

Use the MIC OUT on the TPS-IMPC for the microphone signal.

NOTE: The headphone jack is unavailable after the HBK-3000 Hatchback option is installed.

AUDIO

This 8-position, RJ-45 connector (color coded blue) mates with the TPS-IMPC interface module and

provides differential/single ended audio input and output. It also produces line level differential output.

Pinout description is shown in the following table.

PIN # DESIGNATION DESCRIPTION

1 L + Left Input (Positive)

2 L - Left Input (Negative)

3 GND Ground

4 R + Right Input (Positive)

5 R - Right Input (Negative)

6 S Shield

7 M + Mic Output (Positive)

8 M - Mic Output (Negative)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 59 60

No comments

Crestron TPS-3000 Specifications Page 26