Crestron CNX-ASBK Installation Guide download pdf (Page 4)

Audio Switcher Bussing Kit Crestron CNX-ASBK

PCB to PCB Cable (2-inch, 4-conductor)

(BOTTOM VIEW)

(SIDE VIEW)

Bussing Cable (6-inch, 12-conductor)

KEY

(SIDE VIEW)

(BOTTOM VIEW)

Identity Codes of the CNX-PAD8s

Every equipment and user interface within the network requires a unique identity

code (Net ID). These codes are recognized by a two-digit hexadecimal number from

03 to FE. The Net ID of the unit must match an ID code specified in the SIMPL

Windows program. The Net ID of CNX-PAD8s is factory set to 44. The Net IDs of

each of the daisy-chained CNX-PAD8s must be unique and changed from a PC via

VisionTools

Pro-e (VT Pro-e) or SIMPL Windows.

The method for changing the unit’s Net ID is identical regardless of the software

chosen. Verify that the control system software is running and complete the

following steps to change the Net ID:

1. Disconnect all network devices from the control system.

2. Attach one of the CNX-PAD8s that needs to have its Net ID changed to

the control system.

3. Select Tools | Viewport to open “Crestron Viewport” dialog box.

4. Select Functions | Set Network ID. The software checks the baud rate

and then opens the “Set Network ID” dialog box.

5. The list of current network devices is normally shown in the dialog

box. Highlight the CNX-PAD8.

6. The Net ID of the CNX-PAD8 (default is 44) appears in the box below

the list. Use the scroll arrow to assign another Net ID.

7. When the newly assigned Net ID appears, select the Set ID button to

initiate the change.

8. The software responds with a successful message to confirm the new

Net ID.

9. To verify this procedure, select Diagnostics | Report Network

Devices. Confirm that the CNX-PAD8 has a new Net ID code.

10. Repeat steps 2 - 10 of this procedure for each CNX-PAD8 that needs its

Net ID changed.

11. Reconnect other network devices that were disconnected in step 1.

2 • Audio Switcher Bussing Kit: CNX-ASBK Operations & Installation Guide - DOC. 8143

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Crestron CNX-ASBK Installation Guide Page 4