Crestron Adagio ATC-AMFMSR Specifications download pdf (Page 41)

Crestron Adagio™ AES Entertainment System

Operation

Prior to using this section, refer to the QuickStart Guide (Doc. 6457) that is included

with the AES.

For instructions on using the APAD and the C2N-DBF12 with the AES refer to the

latest version of the Out-Of-The-Box Functionality Guide (Doc. 6493).

Operating the AES is broken down into three modes:

• Source Mode

• Room Mode

• Turn Off the System

Source Mode

Source mode is used to select and control sources that are connected to the AES. A

selected source can also be routed to any room or rooms connected to the AES or a

connected AAE.

Select a Source

To select a source:

• Press Source to put the AES in Source mode. The current controlled source

is displayed on the LCD.

Source Mode

S1 AM/FM

101.90 FM

Stereo

SOURCE

ROOM

HOUSE

BKLT

SCHED

DISPLAY

Control

• Turn the selection knob until the desired source is displayed on the LCD.

Rooms that are connected to the displayed source are indicated on the room

buttons.

• Press the ENTER button (or the soft button labeled Control if it is a device

that can be controlled by the AES) to select and control the source.

When using the out-of-the-box functionality, the AES can control tuner cards

installed in slots 1 and 2, an iPod connected to a CEN-IDOC, and an AAS (when

connected).

Controlling a Tuner

A tuner card installed in either slot one or two can be controlled by the AES front

panel.

The following assumes that a tuner card has been installed in slot one or two (or

both) as described in the tuner card’s guide.

Operations Guide – DOC. 6456B Entertainment System: Adagio AES • 37

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 79 80

Comments to this Manuals

No comments

Crestron Adagio ATC-AMFMSR Specifications Page 41

Comments to this Manuals

Related products and manuals for Receiver Crestron Adagio ATC-AMFMSR