Crestron SWAMP(I)-24X8 Specifications download pdf (Page 11)

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System

Passive Subwoofer Support

Sonnex lets you enjoy extended low frequency performance in any room, providing

high-performance biamplification capability to support any passive in-wall, in-floor,

or freestanding subwoofer. Configuring Sonnex to handle a 2.1 speaker system is

both simple and powerful using its parametric equalizers, offering the choice of 2

or 4

order active crossover filters for each sub and satellite output, plus up to four

additional filters for further room correction and enhancement. With 400 Watts

available in bridged mode, there is plenty of power on hand to fill any room with

deep, gratifying bass.

Intelligent Monitoring and Protection

To help ensure the most seamless user experience and long-lived operation, Sonnex

includes several ways to keep tabs on its operating status and health. On its own,

Sonnex possesses the intelligence to protect itself from many types of faults

including over temperature, over current, over voltage, under voltage, and DC offset

on any channel. In the event of a fault, the front panel LCD provides clear fault

indication to speed the troubleshooting of incorrect wiring, poor rack ventilation, and

other unforeseen issues. Fault alerts may also be broadcast to a system touch screen

or mobile device, and integrators can even monitor and track the data remotely

through Crestron RoomView

software to ensure a rapid service response.

Ultimate Integration

Without question, Sonnex delivers unprecedented intelligence from source to

speaker. Via Cresnet

®2

or high-speed Ethernet, Sonnex affords incredible integration

potential as part of a complete Crestron system, enabling seamless control of every

room and source through a wide selection of touch screens, keypads, wireless

remotes, computers and mobile devices. Complete setup is afforded via USB or

Ethernet using Sonnex Tools software, part of the Crestron Toolbox™ installer

toolkit.

1. Passive subwoofer support requires one zone output to drive the main left and right (i.e., satellite)

speakers, plus one additional zone output to drive a subwoofer with 140W @ 8 Ohms, or two

additional zone outputs bridged to drive a subwoofer with 400W @ 8 Ohms.

2. If using Cresnet as the control system interface, system expansion is limited to one SWAMPE

expander. Support for more than one expander requires Ethernet as the control system interface.

Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 5

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 59 60

No comments

Crestron SWAMP(I)-24X8 Specifications Page 11