Crestron SWAMP(I)-24X8 Specifications download pdf (Page 37)

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System

Set Bus Assignment

To assign a zone to a bus of zones:

Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”

Menu” on page 27.

Press the T or ▲ buttons to display Bussing and press ENTER. A list of

zones is displayed.

Press the T or ▲ buttons to display the zone to be controlled and press

ENTER. The bus setting is displayed.

Bus Setting

Press the T or ▲ buttons to display the bus to which the zone is to be

assigned and press ENTER.

Repeat for every zone to be assigned.

Press MENU to return to the “Zone Setup” menu.

Set Bus Volume Offset

To adjust a zone’s bus volume offset setting:

Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”

Menu” on page 27.

Press the T or ▲ buttons to display Bus Volume Offset and press ENTER.

A list of zones is displayed.

Press the T or ▲ buttons to display the zone to be controlled and press

ENTER. The offset setting is displayed.

Offset Setting

Press the T or ▲ buttons to display the setting to be applied and press

ENTER.

Repeat for every zone to be adjusted.

Press MENU to return to the “Zone Setup” menu.

View Bussing Lists

To view the zones assigned to a bus:

Enter the “Zone Setup” menu as described in “Enter/Exit the “Zone Setup”

Menu” on page 27.

Press the T or ▲ buttons to display Bussing Lists and press ENTER. A list

of busses is displayed.

Press the T or ▲ buttons to display the bus to view and press ENTER. The

first zone in the bus is displayed.

Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 31

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 59 60

No comments

Crestron SWAMP(I)-24X8 Specifications Page 37