Crestron SWAMP(I)-24X8 Specifications download pdf (Page 27)

Crestron SWAMP(I)-24X8 Sonnex™ Multiroom Audio System

Bridge Speaker Outputs

(Optional)

The speaker outputs on the SWAMP-24X8 can be bridged to deliver higher power to

a speaker. The left channel on an individual output can be bridged with the right

channel on the same output. Refer to the following diagram when bridging outputs.

Bridging Outputs

The possible bridging combinations are: Zone 1 + Zone 2, Zone 3 + Zone 4, Zone 5

+ Zone 6, Zone 7 + Zone 8. LEDs on the back of the SWAMP-24X8 indicate

bridged outputs.

After the zones are wired for bridged operation, the SWAMP-24X8 must be

configured with the “Installer Mode” menu or with the Sonnex Tools application.

Refer to “Bridge Outputs” which starts on page 32 or the Sonnex Tools help file for

more information.

WARNING: This amplifier is capable of delivering immense amounts of

undistorted power to your loudspeakers. Please use caution and adequate ear

protection if listening to content at high volume levels as continued exposure to high

sound pressure levels can cause permanent hearing impairment or loss.

Subwoofer Applications

(Optional)

Using a sound level (SPL) meter and Sonnex Tools, the SWAMP-24X8 can be used

to deliver sound to a left-right stereo pair/subwoofer speaker layout. There are two

different wiring configurations that can be used.

Wiring Diagram: Passive Subwoofer Using an Additional Output Pair

SUB STEREO PAIR

LEFT RIGHT

ROOM

BUSSED

Operations Guide – DOC. 7049B Sonnex™ Multiroom Audio System: SWAMP(I)-24X8 • 21

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 59 60

No comments

Crestron SWAMP(I)-24X8 Specifications Page 27