Programmable TV/AV Controller Crestron CN-TVAV
6 •• Programmable TV/AV Controller: CN-TVAV Operations Guide - DOC. 5722B
INPUT-OUTPUT
These four LEDs (red) labeled 1-4 illuminate while the corresponding input or
output device that is connected to the rear panel I/O is active.
TV/AV
The PWR (green) LED is illuminated while the current sensor is detecting that the
TV or AV device connected to the power-out receptacle is ON. The IR (red) LED
illuminates when IR signals are being sent out the IR port.
RS-232
The RXD (red) LED illuminates when the CN-TVAV is receiving serial data from
the RS-232 port. The TXD (red) LED illuminates when the CN-TVAV is sending
data to the port.
NOTE: The IR receiver, for use with an optional Crestron handheld IR transmitter,
is located behind the red lens between the RS-232 and IR IN indicators.
IR IN
This LED (red) illuminates when the CN-TVAV receives a valid IR code from an
optional Crestron handheld transmitter.
Leading Specifications
The table below provides a summary of leading specifications for the CN-TVAV.
Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications of the CN-TVAV
SPECIFICATION DETAILS
Power Input Requirements: US
115VAC, 50-60 Hz, 6.6A maximum
International
230VAC, 50-60 Hz, 5.5A maximum
Power Output: US
115VAC, 50-60 Hz, 6A maximum
International
230VAC, 50-60 Hz, 5A maximum
Internal Fuse
1A, 250V, Fast/Quick Acting
1
IR Reception Frequency
IR Reception Angle
o
SIMPL Windows
2
CEN/CN-TVAV Update File
Version 51205V.UPZ or later
3
CNMSX-AV/Pro Update File
Version 51226X.UPZ or later
3
CNRACKX/-DP Update File
Version 51226W.UPZ or later
3
MaxAnalogSignals
4
MaxDigitalSignals
4
MaxNVRAM
5
MaxProgramSize:
256K
Maximum CN-TVAVs per CNMSX
control system
25 if touchpanels are used, 30 if no
touchpanels are used
6
Dimensions & Weight
Weight: 3.54 lb (1.61 kg)
7
Comments to this Manuals