Crestron CN-TVAV Specifications download pdf (Page 13)

Crestron CN-TVAV Programmable TV/AV Controller

Operations Guide - DOC. 5722B Programmable TV/AV Controller: CN-TVAV •• 9

NOTE: While facing the rear panel of the unit, pin 1 of the RS-232 port is located at

the upper-left of the port.

Typical Connections when Programming

CRESNET RS-232

6.6A MAX

50-60HZ

115 VAC

POWER OUT 6A MAX

POWER IN

I/O

1 2 3 4 G

TO PC DURING

PROGRAMMING

TO VAC

OUTLET

CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647 USA

1. Attach the RJ11 to DB9F adapter to one end of the 6-conductor

modular cable. (Not required if a PC to Control Processor cable is

fabricated.)

2. Attach the RJ11 connector (of the adapter and cable combination) to

the RS-232 port.

3. Attach the DB9 connector (of the adapter and cable combination) to an

available COM port on the PC.

4. Attach the RJ11 connector of the modular cable supplied with the

touchpanel (or fabricated touchpanel to control processor cable) to the

CN-TVAV port labeled CRESNET.

5. Attach the other connector of the modular (or fabricated) cable to the

touchpanel.

6. Plug CN-TVAV power cord into VAC wall outlet or power strip.

Programming Cable Fabrication Specifications

In the event that modular cables or RJ11 to DB9F adapter is not available to program

the CN-TVAV at the RS-232 port, the table below and the diagram on the next page

are provided so that the cable can be fabricated.

NOTE: The RJ11 to DB9F adapter is available commercially or contact Crestron

customer service for part number 15556.

RJ11 Modular Cable Pinouts

PIN DESCRIPTION PIN DESCRIPTION

1 * CTS (Clear to Send) 4 TxD (Transmitted Data)

2 GND 5 RTS (Request to Send)

3 RxD (Received Data) 6 Not Connected

* While facing the rear panel of the unit, pin 1 is located at the upper-left of the port.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Comments to this Manuals

No comments

Crestron CN-TVAV Specifications Page 13

Comments to this Manuals

Related products and manuals for TVs & monitors Crestron CN-TVAV