Crestron CN-TVAV Specifications download pdf (Page 11)

Crestron CN-TVAV Programmable TV/AV Controller

Operations Guide - DOC. 5722B Programmable TV/AV Controller: CN-TVAV •• 7

1 The listed internal fuse is available from Wickmann (www.wickmannusa.com, part

number 3701100041) and larger commercial retailers.

2 The latest software version can be obtained from the What’s New page (SIMPL

Windows section) or Downloads page (SIMPLWIN Library) of Crestron’s website

(www.crestron.com). New users are required to register in order to obtain access to

the FTP site.

3 Filenames for update files have a UPZ extension and can be obtained from the

What’s New page (Control Systems Update Files section) or Downloads page

(OPSYS Library) of Crestron’s website. Update files are designed for specific

devices. If an update file is loaded into a device other than for which it was intended,

it may lockup the device that would then have to be returned to Crestron. Update

files with a “S” designator for the ST-CP, “V” designator are for CEN/CN-TVAV,

“W” for CNRACKX/-DP, and “X” for the CNMSX-AV/Pro. These devices are able

to recognize and reject incorrect update files. However, when updating, do not

ignore any Crestron Viewport warning prompts or messages.

4 Maximum number of SIMPL Windows analog and digital signals that CN-TVAV

can process.

5 The CN-TVAV has a simulated clock and simulated NVRAM. If power is lost, the

clock and symbols utilizing simulated NVRAM do not maintain previous settings.

6 Due to program size in the CNMSX, the recommended limit of CN-TVAVs

programmed into a CNMSX using the CNXENET+ card is 25 if each room (CN-

TVAV) also contains a touchpanel. With this configuration, (depending upon the

wiring, it may be advisable to add a CNXHUB), 20 sources may be programmed

with the 25 rooms. If there are no touchpanels are utilized, the recommended limit of

CN-TVAVs is 30. If a Cresnet system has more rooms, either connect additional

CN-TVAVs to another CNMSX or utilize CEN-TVAVs.

7 The weight listed is the combined weight of the CN-TVAV, STIRP, 5-pin

connector, and modular cable.

As of the date of manufacture, this unit has been tested and found to comply with

specifications for CE marking.

NOTE: This device complies with part 15 of the FCC rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may

cause undesired operation.

Setup

Cresnet Modular Cabling

NOTE: If making network connections to the Cresnet peripherals, refer to the latest

revision of the Crestron Network Modular Cable Requirements (Doc. 5682). This

document can be obtained from the Products page (PRODUCT MANUALS section,

manuals for software and wiring diagrams section) or Downloads page (CABLES

and MANUAL Libraries) of Crestron’s website (www.crestron.com). Search for

MODULAR.PDF.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Comments to this Manuals

No comments

Crestron CN-TVAV Specifications Page 11

Comments to this Manuals

Related products and manuals for TVs & monitors Crestron CN-TVAV