Crestron C2N-DAP8RC Specifications download pdf (Page 19)

Crestron C2N-DAP8RC Digital Audio Processor with Room Control

Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 15

“Serial Number to TSID Conversion Tool” Window

3. Enter the serial number or TSID number as instructed; press the

appropriate button to obtain the corresponding number.

NOTE: Enter serial numbers, including spaces, exactly as they appear on the unit

label. Alpha characters in serial numbers or TSID numbers may be entered in upper

or lower case.

Rack Mounting

WARNING: To prevent bodily injury when mounting or servicing this unit in a

rack, you must take special precautions to ensure that the system remains stable. The

following guidelines are provided to ensure your safety.

 If the rack is provided with stabilizing devices, install the stabilizers before

mounting or servicing the unit in the rack.

 When mounting this unit assembly in a partially filled rack, load the rack from

the bottom to the top with the heaviest component at the bottom of the rack.

NOTE: If rack mounting is not required, rubber feet are provided for tabletop

mounting or stacking. Apply the feet near the corner edges on the underside of the

unit.

NOTE: Reliable grounding of rack-mounted equipment should be maintained.

Particular attention should be given to supply connections other than direct

connections to the branch circuit. (e.g., use of power strips).

Two “ears” are provided with the unit and must be installed so that it can be rack

mounted. Refer to the illustration on the next page and complete the procedures to

attach ears to the unit. The only tool required is a Phillips screwdriver.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 79 80

No comments

Crestron C2N-DAP8RC Specifications Page 19