Crestron C2N-DAP8RC Specifications Page 31
- Page / 80
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Crestron C2N-DAP8RC Digital Audio Processor with Room Control
Operations Guide – DOC. 8187A Digital Audio Processor with Room Control: C2N-DAP8RC • 27
• Avia Guide to Home Theater, from Ovation Software
(www.ovationsw.com)
OR
Video Essentials, from DVD International (www.videoessentials.com).
The Avia Guide to Home Theater and the Video Essentials DVD discs provide
information and extensive instructions, including video test patterns and audio test
signals, for setting up a home theater environment.
Crestron Digital Audio Tools
The Crestron Digital Audio Tools software program is available from the Crestron
website. This program allows you to customize the configuration of the audio
processor to match the requirements of the listening/viewing area. You can specify
the speaker configuration, adjust the delay settings (to permit sound from all the
speakers to reach the listener at the same time), select the decoding mode for every
signal type input, and adjust the output setting (gain) for each speaker. The program
also provides the easiest method to configure the 8-channel, 6-band parametric
equalizer that lets you set the frequency, gain, bandwidth, and filter type for each
speaker to balance the listening area.
Refer to the help file that accompanies the software for more detailed information.
Setup Procedures
Setting up the C2N-DAP8RC surround sound processor consists of a number of
steps that need to be accomplished in the order presented here.
1. Place an SPL meter at the designated “sweet-spot” location in the room.
Measure the distance, to the nearest half foot, from the SPL meter to each
speaker in the room, including the subwoofer.
2. Launch the DAT program, and set communications parameters as described
in “Communications” on page 31.
3. Specify the room speaker arrangement as described in “Speaker Sizes / Bass
Management” on page 33.
4. Using the measurements obtained in Step 1 above, set up the system delays
as described in “Delay Settings” starting on page 34.
5. Select Tools | Realtime Mode from the menu bar (or click the Realtime
Mode icon on the toolbar). Then, select Tools | Source/Noise Steering (or
click the Source/Noise Steering icon), and use the information given in
“Source/Noise Steering” on page 28, to send pink noise to each speaker to
verify that the speakers are connected and functioning.
6. Using the instructions in “Using Source/Noise Steering for Calibration” on
page 30, and in ”Room Calibration” on page 34, perform room calibration
procedures.
7. Perform the instructions given in “Input Settings” on page 35 to set the
input levels for each of your audio sources.
8. Perform the instructions given in “Output Settings” on page 37 to set the
relative gain for each speaker in the room for each decoding mode.
9. Follow the instructions given in “Graphic EQ” on page 38 to specify the
number of graphic equalizers to be used in the system and to set their
gain/attenuation level.
- Crestron C2N-DAP8RC 1
- Operations Guide 1
- Contents 3
- Digital Audio Processor with 5
- Room Control: C2N-DAP8RC 5
- Surround Sound Modes 6
- Movie Mode 7
- Music Mode 7
- Dolby Digital EX 7
- DTS 5.1 7
- Parametric Equalizer 9
- Room Control Options 9
- Specifications 9
- SPECIFICATION DETAILS 10
- (continued on next page) 10
- Physical Description 11
- Input and Output Ports 12
- VIDEO OUT 12
- VIDEO IN 1-2-3-4 12
- PIN FUNCTION 14
- Industry Compliance 15
- Network Wiring 15
- Identity Code 16
- Set Net ID by TSID 17
- Rack Mounting 19
- Hardware Hookup 20
- Audio/Video Distribution 21
- Video Routing 23
- Universal Remotes 27
- Code Verification 28
- Map the Universal Remote 29
- Surround Sound System Setup 30
- Crestron Digital Audio Tools 31
- Setup Procedures 31
- DAT Program Procedures 32
- View Error Log 33
- Pink Noise: 34
- Dolby Noise: 35
- Communications 35
- Delay Settings 38
- Room Calibration 38
- Input Settings 39
- Output Settings 41
- Panorama 41
- Center Width 41
- Dimension 42
- Graphic EQ 42
- Parametric Equalizers 43
- Example Program 45
- System Setup 46
- Audio Configuration 47
- Equalization 48
- Audio Switching 49
- Video Switching 49
- Selecting Sources 50
- Programming Software 51
- Slot 02: IR Receiver 54
- Slot 03: DAP8 Video Switch 54
- Uploading and Upgrading 59
- Upload via SIMPL Windows 61
- Upload via Crestron Viewport 61
- Firmware Upgrade 63
- Problem Solving 64
- TROUBLE 65
- POSSIBLE 65
- CAUSE(S) 65
- CORRECTIVE ACTION 65
- Further Inquiries 66
- Future Updates 66
- SIGNAL TYPE 70
- FUNCTION 70
- (D/A, I/O)* 76
- Return and Warranty Policies 79
Related products and manuals for Soundbar speakers Crestron C2N-DAP8RC
(114 pages)© 2020, manymanuals.com. All rights reserved. | 0.284 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals