Crestron C2N-DAP8RC Specifications download pdf (Page 32)

Digital Audio Processor with Room Control Crestron C2N-DAP8RC

28 • Digital Audio Processor with Room Control: C2N-DAP8RC Operations Guide - DOC. 8187A

10. Refer to “Parametric Equalizers” on page 39 adjust the frequency response

interaction within the room for each speaker in the system.

DAT Program Procedures

After launching DAT, either open an existing program for the C2N-DAP8RC, or

start a new program and choose the C2N-DAP8RC template. The following

paragraphs describe the features and functions of the DAT program. Use the DAT

software to perform the setup procedures for the C2N-DAP8RC in the order

specified in the previous section.

Toolbar Icons

The following paragraphs describe some of the unique toolbar icons that provide

quick access to important digital audio tools functions.

Realtime Mode

The Digital Audio Tools Realtime Mode permits all changes to be transferred to the

device immediately. This is especially useful during calibration of the room

To select Realtime Mode, click the Realtime Mode icon on the Digital Audio Tools

toolbar, or select Tools | Realtime Mode. The system displays the following

message:

As suggested in the message, synchronize the application and the device by

performing a “Send To Device” or “Load From Device” transfer from the

Communications tab screen before attempting any real-time equalizer configuration

changes. Refer to “Communications” on page 31 for additional details.

Source/Noise Steering

The Digital Audio Tools program “Source/Noise Steering” window is for selecting

internal noise and external audio sources for calibrating the other parameters in the

system. Refer to “Using Source/Noise Steering for Calibration” on page 30. The

option is only available if you are working in Realtime mode. Clicking the

Source/Noise Steering icon displays the screen shown on the next page.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

No comments

Crestron C2N-DAP8RC Specifications Page 32